Installation guide

Software update
82
Siemens Building Technologies
Fire Safety & Security Products 08.2007
8 Software update
Should it be necessary to reinstall or repair the SISTORE MX NVS software,
please proceed as follows:
1. Follow the description in Section 6.2: Subsequently installing a hardware
driver.
2. Select the option Update.
Î This will have the effect of re-installing every files that have been installed
during the first installation. It should be noted that existing files may be
overwritten in this procedure! The files containing the configuration settings, the
user management data, and the recorded sequences will not be overwritten.
9 Writing to CD/DVD
Prerequisite:
In order to backup data on CD/DVD, the burner software Nero V6.x must be
installed on the NVS PC.
NOTE
The functions Double Layer and/or Light Scribe are available only if the following conditions are met:
z A suitable burner is available.
z The burner software Nero Version 6.6.4.x or higher or Version 7.x is installed.
The software has been tested successfully using the following external USB
burners (combined CD/DVD burners):
– Plextor PX-740UF
– LiteOn SOHW-1673 SX-02
– LG GSA-2164D-R
NOTE
Suitable data media are all standard CD-R, CD-RW, DVD±R, DVD±RW.
The data medium need not be formatted additionally.