Installation guide

Installation
64
Siemens Building Technologies
Fire Safety & Security Products 08.2007
6.3 Installing RemoteView on a client PC
Prerequisite:
To log into the system, the user must at least have main user or rather admin
user rights. This applies to the first-time installation of the software as well as
to a subsequent update.
1. You can either use a CD drive or copy the software supplied onto a memory
stick.
2. Launch the file SISTORE_MX_ RemoteView_260_SP1.exe.
NOTE
The installation program will start automatically when the CD is inserted if your operating system has
the appropriate configuration.
Abb. 1 Setup language
3. Select a language.
4. Click OK.
Î The following dialog box will appear:
Abb. 2 InstallShield Wizard