Operating Instructions

Chapter 2 – Installing and Configuring the OPC/SNMP Agent
16 Siemens Building Technologies, Inc.
Adding MIB References
In the SNMP Engineering Tool, you create MIB references to link OPCServer point information to
information in an MIB. You will need to refer to the MIB file thoughout this procedure.
To add MIB references, do the following steps:
1. Open the MIB file in Microsoft WordPad or other text editor, and find the group information (see
Figure 2).
2. In the top-left pane of the SNMPEngTool window, click the top node.
3. On the MIB menu, click Add Branch.
4. In the Add Group dialog box, do the following:
a. In the Group Name box, type the name of a group defined in the MIB.
b. In the OID box, type the group object identifier number.
c. Click OK.
The group is displayed in the SNMPEngTool window.
Figure 2. Example of MIB Group Information.
5. Repeat Steps 2 through 4 for each group defined in the MIB.