Installation Instructions
Installation Instructions
Document No. 565-995
Rev.1, November, 2001
Insight BACnet Option for Phoenix Controls
Siemens Building Technologies, Inc. Page 1 of 2
PRODUCT DESCRIPTION
The BACnet Option needs to be installed on Insight.
This installation allows the user to communicate with
BACnet networks and monitor and command points
from either an Insight workstation or a third-party
BACnet workstation.
PRODUCT NUMBERS
571-195 BACnet Option for Insight
571-196 BACnet Option 2 Site License
571-197 BACnet Option 5 Site License
571-198 BACnet Option 10 Site License
EXPECTED INSTALLATION TIME
2 minutes.
REQUIRED TOOLS AND MATERIALS
• Cabling and connectors (Figure 1)
PREREQUISITES
• Determine which computer will have the
Insight BACnet Option installed.
• Locate the Phoenix BACnet Accel-Way
ethernet port.
INSTRUCTIONS
Preparing to Install the Open Processor
1. Run the Ethernet cabling as described in Figure
1.
2. Connect the cable to the Ethernet port of the
workstation that has the BACnet option installed.
Ethernet
Port
Ethernet
Port
GW0843R2
Accel-Way
for
BACnet
APOGEE Insight 3.2
or higher with
BACnet Client Option
TM
TM
Figure 1. Connecting the Insight Ethernet to Accel-Way Gateway.