Operating Instructions

Chapter 4 – Configuring Groups, Shared Points, and Statistics
36 Siemens Building Technologies, Inc.
Table 6. Statistic Types.
Type Description
POINTWRITEERRS Total number of write errors (BAD quality writes) by a point.
• Source Group or Point—Type, or click
to browse for, the group or point name for which the
statistic is requested.
If you type the name of the source point, be sure to precede the point name with its group name
and a back slash, for example Group1\point1.
• Destination Point—Type, or click
to browse for, the name of the point to which the statistic
will be written.
3. Click Add. The statistic configuration is shown on the Configure Statistics dialog box.
4. To add another statistic, repeat Steps 2 and 3.
5. Click Done to close the Configure Statistics dialog box.
6. Click
to save the information to the OPC Data Manager data file.
Removing Statistics
To remove a statistic, do the following steps:
1. Click
. The Configure Statistics dialog box opens.
2. Select the statistic that you want to remove, and then click Delete.
3. Click Done to close the Configure Statistics dialog box.
4. To save the change, click
.