User Manual

www.siemens.com/symaro
■ All in harmony – thanks to uniform
room design
The Symaro sensors for flush mounting
are designed for interior use and excel in
compact, inconspicuous design. In com-
bination with the elegant frames of the
DELTA switches, they blend perfectly into
any surroundings.
■ Enjoying a perfect feeling of comfort
while saving energy
Energy consumption of the Symaro sen-
sors for flush mounting is extremely low.
Their high measuring accuracy and fast
response are prerequisites for energy-
efficient HVAC control.
Only accurate and expressive measured
values ensure energy-efficient room con-
trol plus maximum comfort. The sensors’
optimized design enables them to acquire
the measuring variables quickly and accu-
rately. At the same time, disturbances like
the temperature of the wall are compen-
sated for. Hence, Symaro sensors are the
ideal basis for saving energy and costs.
Accurate measured values are needed for
energy-efficient ventilation, for example,
ensuring that the amount of outside air
supplied to the room does not exceed the
amount actually required. So air quality
sensors are very important components
of demand-controlled ventilation. They
acquire the exact CO
₂
content of the room
air or the level of mixed gases produced by
paints or given off by materials. The fan’s
output is controlled depending on these
measured values.
Symaro sensors for flush mounting excel
not only in elegant design, but also in
economical operation – thanks to reduced
energy consumption, lower CO
₂
emissions,
and lower costs.
The information in this document contains general descriptions of technical options available,
which do not always have to be present in individual cases. The required features should therefore
be specified in each individual case at the time of closing the contract.
© Siemens Switzerland Ltd, 2011
Siemens Switzerland Ltd
Industry Sector
Building Technologies Division
International Headquarters
Gubelstrasse 22
6301 Zug
Switzerland
Tel [phone]
Highlights
■ Sensors of elegant design for
flush mounting, suited for any
type of application in the room
■ Energy savings thanks to fast, highly
precise measurement and low energy
consumption of the sensor
■ Adaptation to individual application
owing to configurable outputs
■ Multisensor with several measuring
parameters in one unit, ensuring
lower installation and wiring costs
■ Extensive choice of colors and
designs of DELTA switches
Symaro sensors in switch design for flush mounting blend perfectly into any surroundings.