Operating instructions

Configuring with Web Based Management
5.5 "System" menu
SCALANCE W770/W730 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C323-03
179
5.5.14
Syslog Client
System event agent
Syslog according to RFC 3164 is used for transferring short, unencrypted text messages
over UDP in the IP network. This requires a Syslog server.
Requirements for sending log entries:
● The Syslog function is enabled on the device.
● The Syslog function is enabled for the relevant event.
● There is a Syslog server in your network that receives the log entries. (Since this is a
UDP connection, there is no acknowledgment to the sender)
● The IP address or the FQDN name of the Syslog server is entered on the device.
Description
The page contains the following boxes:
●
Syslog Client
Enable or disable the Syslog function.
●
Server IP Address
Enter the IP address or the FQDN name of the Syslog server.
This table contains the following columns
●
Select
Select the row you want to delete.
●
Server Address
Shows the IP address or the FQDN name of the Syslog server.
●
Server Port
Enter the port of the Syslog server being used.