Operating instructions

Configuring with Web Based Management
5.4 "Information" menu
SCALANCE W770/W730 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C323-03
117
Description
The page contains the following box:
●
Associated stations
Shows the number of clients logged on to the access point
The table has the following columns:
●
AID
(Associated ID)
Shows the connection ID of the client. If the client connects to the access point via the
VAP interface, the client is assigned a connection ID. The connection ID is unique within
a VAP interface. If two clients log on at different VAP interfaces, both clients can receive
the same ID.
●
Radio
Shows the available WLAN interfaces.
●
Port
Shows the VAP interface.
●
MAC Address
Shows the MAC address of the client.
●
System Name
Shows the system name of the client if the client communicates this to the access point.
Not all clients support this parameter.
●
Tx Chain
Shows the antenna connector over which the client communicates with the access point.
●
Signal Strength [dBm]
Shows the signal strength of the connected client in bBm.
●
Signal Strength [%]
Shows the signal strength of the connected client as a percentage.
●
Age [s]
Shows the age of the listed client.
5.4.13.2
iREF WDS List
The WBM page shows the access points logged on to the access point via a WDS link. This
page shows information such as the antenna used and the signal strength of the WLAN
interface.
Note
•
This tab is available only in access point mode.
•
This WBM page can only be configured with the following KEY-PLUG:
–
Access point: W780 iFeatures (MLFB 6GK5 907-8PA00)