Installation Guide

Intelli-Arc
™
Diagnostic Tool
Features:
J Improves troubleshooting accuracy
J Reduce time spent and number of trips to problem site
J Simplistic setup: wire in, wire out to use
J Wireless communication- enables “1 person”
troubleshooting
J Can be used to troubleshoot any AFCI circuit
J LED Indicators: provides status level for current,
ground fault, and arc fault
J Status Indicators: provides confirmation of power and
communication connection
Technical Specifications:
J Catalog Number: IDT5000
J Wire Leads (included):
- Size: CU, #12 solid
- 60/75 C
- Length: 4ft.
- Number of leads: 4
J Lugs:
- Size range: CU #14-8/AL#12-8
- Torque rating (max): 25 lb-in
J Environment:
- Operating ambient temperature: 41° F-104° F
- 80% for up to 88° F, decreasing linearly to
50% at 104° F
- Altitude: up to 6,561ft above sea level
J Operating Ranges:
- Volts: 120V AC- 60Hz, min/max range: 108V-132VAC
- Amperage: 20 amps
- Short Circuit Rating: 22,000 amps
J FCC:
- Complies with limits of Class B digital device,
pursuant to part 15 of the FCC rules.
J Battery (for hand held)
- Qty (2) AA Alkaline batteries
J Test Procedure (for hand held)
- Turn “OFF” hand held
- Press and hold “CLEAR” button
- Press “PWR” button on handheld while continuing to
hold “CLEAR” button
- LED columns will light up one by one
www.usa.siemens.com/intelliarc
Data Sheet