User Manual

2 / 6
Siemens Combined chip and transponder card encoders CE2N6353en_01
Building Technologies 2012-12-01
Functions
The HXW3.2 access card encoder reads and describes:
• Transponder cards with chip T5567 / T5577 by Atmel/Temic or
• ISO 7816 compatible chip cards with contactable security memory chip, type
SLE5542/SLE4442.
Only chip cards with Siemens security code are allowed. Other cards are not ac-
cepted, i.e. are deactivated after being misused 3 times.
Insert the chip card in the lit card slot for reading and writing.
For reading and writing, place the transponder card on the area marked by a tran-
sponder symbol.
You can create access cards for a single guest room or access cards for a group of
rooms for hotel staff. The LCD display wizard provides information and instructions
on encoding.
Type summary
HXW3.2 Combined chip and transponder card encoders
SLE5542 Chip card
SLE4442 Chip card
Order the transponder cards with chip T5567 by Atmel/Temic from the respective
manufacturer.
Transponder cards are sensitive to mechanical damages. As a result, use a plastic
protective cover.
Ordering
Equipment combinations
Prerequisite
The device must be connected to a TCP/IP interface (or to a serial interface as an
option) of the PC containing the HSC software.
New or old?
New or old devices can be connected to an HS system. To this end, the following
registry entries are required.
Important: From BL12, Version 5.0.3.8, you no longer need to manually enter
data in the registry. The software automatically writes to the registry.
Note on chip cards
Read/write chip cards
Read/write transponder
cards
Note on
chip cards
Note on
transponder cards
Type Stock number Designation
HXW3.2 S55373-C108 Combined chip and transponder card encoders