User Manual

3/14
Siem ens HRC3.2 – Room controller CM2N6314en
Building Technologies 2016-12-23
· Control of blinds or curtain
· Receipt of access code from the connected magnetic, chip or transponder card
reader
· Control of access to guest rooms, suites and general access areas
· Receipt of access codes for guests, hotel staff and emergency access cards from
the central management station at the reception
· Management of all access codes
· Activation of door opening mechanism when access is granted
· SOS alarm or bathroom alarm
· "Do not disturb" and "Room service call" or "Make up room"
· "Guest present" indicator for hotel staff only
· Bell disabled in conjunction with "Do not disturb"
· Alarm message if door is opened in unoccupied room (door intrusion)
· Alarm message if window is opened in unoccupied room (window intrusion)
· Registration and transfer of messages and alarms to the database server
· Optionally, other functions can be programmed and linked to inputs and outputs
· Room controller parameter setting
· Remote adjustment of room comfort setpoint
· Alarm monitoring and message display
· Room status monitoring
· Automatic registration of temperature data
· Trend graph for past three days
· Configurable outputs (guest-dependent or staff-dependent)
· Interface to front-office system (FOS) via the hotel room management station
HSW3.1
· Online communication over building bus
· KNX bus connection (in LTE mode)*
· RS485 room bus for communication with room operator units, card readers and card
holders
* KNX communications take place in the LTE mode. The S-mode-communication is
available, but requires a customer-specific.
Ordering
When ordering, please specify the quantity, product name and type code:
Example: 20 Room controllers HRC3.2
Compatibility
Please refer to the assortment overview N6301.
Access control
Management level
Building automation
and control
Communication
Note