User Manual

RCU001
PC3: Workstation
reception
TCP/IP
FOS
PC2: Workstation technician
(Operate and monitor)
KNX
RCU150
RCU...
PC1: Database server
IP /
KNX
IP
RS232
Encoder2
...
...
Front office
Siemens Hotel SolutionHotel rooms
Fidelio or
Hogatex / Bosch
- Database
- DGU driver
- User Interface
- Key Client
RS232
Encoder1
RS232 (for Fidelio)
Fig. 2-2: Example of a hotel configuration (medium-sized system)
2.3 Software
2.3.1 Operating system
• Windows XP Professional for the DGU und UI PCs
• Windows XP Professional for the database PC
• Both installed with SP 2 or higher.
2.3.2 TCP/IP protocol
All communications between the Siemens Hotel Solution components are based on the
TCP/IP protocol. For the Siemens Hotel Solution, therefore, TCP/IP must be installed
on every PC fitted with an Ethernet card. Refer to the relevant operating system
manual for information on setting up TCP/IP. The recommended IP addresses are
shown in Section 3.3.
8/80
Siemens Hotel Solution - System software for Windows XP CM110600en
Building Technologies System requirements 2014-07-07