User Manual

Fig. 6-23: "Log Communication"
Entering <T> or <t> toggles the function on and off:
As of activation, all queries of the database, essentially datagrams to the RCUs, are
issued on the DGU console interface and stored in the LOG files until deactivation.
Fig. 6-24: "Trace DB-Messages" command
<P>/<p> acts as a toggle switch:
As of activation, various supplemental messages are issued on the console when
corrective measures are required internal to the DGU. As a rule, this information is
stored in a LOG file, independent of the toggle switch. The console information is only
ended after deactivation.
Abb. 6-25: 'Print Warnings'
Trace DB
-Messages
command
Menu: Print Warnings
72/80
Siemens Hotel Solution - System software for Windows XP CM110600en
Building Technologies Troubleshooting 2014-07-07