User Manual

Fig. 4-33: Dialog box indicating completion of setup
Click Finish to close the setup program.
4.3.2.2 Enabling the license
In order to use the Siemens Hotel Solution, you will need a dongle (software protection
module) for each hotel.
The dongle is plugged into the parallel (printer) port. In large hotels with more than one
computer, the dongle must be plugged into the database server.
You can specify the computer to which the dongle is connected via the user interface,
under System | Configuration Parameters. This setting can only be modified by a
user with extended user privileges.
There is a license file (*.reg) associated with the dongle, and this contains all the
information relating to the specific project.
Copy your license file to ..\Siemens\DESIGO\Licence Server 3.0\Licenses.
To set up the license file, first ensure that the license server is fully installed, and then
start the License Utility. To do this, select Start
| All Programs | License Utility.
Select the menu sequence File | Register License File and add the license file.
Select Edit | Edit management station list from the License Utility menu, enter the
name of the local computer to which the dongle is connected, and add it to the list by
clicking Add >> .
Completing the setup
License file
Settings in the Hotel
Solution
user interface
Installing the license
with the License Utility
33/80
Siemens Hotel Solution - System software for Windows XP CM110600en
Building Technologies Siemens Hotel Solution system setup on a PC 2014-07-07