User Manual

You can accept the default path (the Programs folder on the system partition). Click
Next to open the dialog box in which you can select the components you want to install.
Fig. 4-22: Dialog box for selecting the components to be installed
In this dialog box, you should select only those components which are actually needed
on the PC on which you are installing the program.
UI
Installs the user interface for hotel operation and
display
Key Client This is the service for communication between the PC
and the card-reader or card-writer. It is only required
on PCs to which a card-reader or card-writer is to be
connected.
DGU Driver This is the service for communication between the
database and the room controllers, and is required on
the PC(s) to which the EIB bus is connected.
HotFos
or
FideHot
These are the programs used to connect the
Hogatex/Bosch or Fidelio front office system to the
Siemens Hotel Solution system. The selected
program is installed on a PC according to the FOS in
use.
Hotel Solution Database Installs the hotel database with SQL tools, and must
only be installed on the database server. In addition to
the empty database, there is another database
available, containing data for demonstration purposes.
Help
Copies the user's guide onto the PC. This guide is
available in several languages.
Object Nationalizer This can be used to localize the user interface, i.e.
translate it into another language.
Configurator
Required to setup and configure individual services.
Selection of components
27/80
Siemens Hotel Solution - System software for Windows XP CM110600en
Building Technologies Siemens Hotel Solution system setup on a PC 2014-07-07