User Manual

The tools for configuring the Siemens Hotel Solution and commissioning the user
interface are only available to users with Administrator privileges.
8.2 Overview of components
This section consists of a brief overview of the components of the Siemens Hotel
Solution system. For a description of the directories in which the various components
are located, refer to Section 3.4, Directory structure of a Hotel Solution installation.
8.2.1 DGU driver
Section 5.4 describes the installation and configuration of the DGU driver software.
For information on the diagnostic options available, refer to Section 6.2, Room
controller communication diagnostics.
8.2.2 FIDELIO Link (Fidehot)
Refer to the user's guide, "FIDELIO <-> Siemens Hotel Solution Link" for a description
of the installation and configuration procedures.
For further details, refer to the "FIDELIO <-> Siemens Hotel Solution Link" technical
manual and to the Siemens Hotel Solution technical manual. These manuals are
internal documents, available only to employees of the company.
8.2.3 FOS Link (HotFOS)
Refer to the technical manual, "FIDELIO <-> Siemens Hotel Solution Link (HotFOS)" for
a description of the installation and configuration procedures.
This manual is an internal document, available only to employees of the company.
8.2.4 KeyClient
Installation and configuration of the key client software are described in Section 5.5
"Adding a KeyClient service".
8.2.5 User interface (UI)
Section 4.3 describes the installation of the user interface software. Refer to the user's
guide to the user interface for more information.
Note
80/82
Siemens Hotel Solution - System software Service Pack 2 for Windows 7 020_A6V10444517_en--_a_--
Building Technologies Appendix 2014-07-07