User Manual

RCU001

PC3: Workstation

reception

TCP/IP

FOS

PC2: Workstation technician

(Operate and monitor)

KNX

RCU150

RCU...

PC1: Database server

IP /

KNX

RS232

Encoder2

...

Front office

Siemens Hotel SolutionHotel rooms

Fidelio or

Hogatex / Bosch

- Database

- DGU driver

- User Interface

- Key Client

RS232

Encoder1

RS232 (for Fidelio)

Fig. 2-2: Example of a hotel configuration (medium-sized system)

2.3 Software

2.3.1 Operating system

• Windows 7 / 64bit for the DGU und UI PCs.

• Windows 7 / 64bit for the database PC.

• Both installed with SP 1 or higher.

2.3.2 TCP/IP protocol

All communications between the Siemens Hotel Solution components are based on the

TCP/IP protocol. For the Siemens Hotel Solution, therefore, TCP/IP must be installed

on every PC fitted with an Ethernet card. Refer to the relevant operating system

manual for information on setting up TCP/IP. The recommended IP addresses are

shown in Section 3.3.

8/82

Siemens Hotel Solution - System software Service Pack 2 for Windows 7 020_A6V10444517_en--_a_--

Building Technologies System requirements 2014-07-07