User Manual

Fig. 8-2 Startup and Recovery dialog box
8.1.2 Network settings
Siemens Hotel Solution requires that TCP/IP should be installed on your PC. For
information on the address to use, refer to Section 3.3.
You must undertake the appropriate release when a firewall is activated. The example
below features Windows firewall, where the DGU driver and HSC Tool must be entered
(Fig. 8-1: Windows XP system properties and Fig. 8-2 Startup and Recovery dialog
box):
Important!
78/82
Siemens Hotel Solution - System software Service Pack 2 for Windows 7 020_A6V10444517_en--_a_--
Building Technologies Appendix 2014-07-07