User Manual

6.2.3 "Configure Bus" submenu
From the main menu, type <C> or <c> for access to this submenu, which contains the
following options:
<F1> Online help about this item
<R>
ReInit RCU
Fig. 6-6: The Configure Bus submenu
Press <F1> for access to online help, which contains a brief explanation of the
individual menu items.
Fig. 6-7: Online help for the Configure Bus submenu
This command should only be used for commissioning or in the event of critical
problems.
Entering <R> or <r>, followed by the required address parameters, initiates the
"RCU-Init" process in the database.
In this process, all the relevant datagrams with setpoints and access codes are
generated in the database and transmitted by the DGU driver to the room controllers.
Online help
ReInit RCU option
Important note
STOP
67/82
Siemens Hotel Solution - System software Service Pack 2 for Windows 7 020_A6V10444517_en--_a_--
Building Technologies Troubleshooting 2014-07-07