User Manual

Fig. 4-41: Information about the next installation
4.2.2.4 Configure virtual COM ports on the PC
A virtual COM port should be setup on the PC so that the key client can talk to the chip
encoder via IP. Detailed information is available in the LANTRONIX documentation,
located on the installation CD in the XPort folder. The following describes a sample
configuration using the CIN Port Redirector.
The chip encoder must be connected to the network via Ethernet. The CPR Manager is
then started.
Fig. 4-42: Query CPR Manager
Select Add or Remove in the COM Port menu to add a new, virtual COM port or click
the plug symbol.
The dialog box to select the port number opens.
Set up virtual COM port
CPR Manager
35/82
Siemens Hotel Solution - System software Service Pack 2 for Windows 7 020_A6V10444517_en--_a_--
Building Technologies Siemens Hotel Solution system setup on a PC 2014-07-07