User Manual

3.3 Recommended IP addresses
If TCP/IP is used for communications within the Hotel Solution network, the IP
addresses used should be in the following range
10.1.1.1 … 10.1.1.63, mask 255.255.255.0.
Within this range, the addresses from 10.1.1.1 to 10.1.1.9 are reserved for routers and
bridges.
The database server should be allocated the address 10.1.1.10.
No DHCP server is used.
If you choose other addresses, you should alter the addresses used in the examples in
this manual and on the CD-ROM accordingly.
In this context, it is essential to contact the IT department responsible for the
IT structure in the hotel.
3.4 Directory structure of a Hotel Solution
installation
To simplify the handling of Siemens Hotel Solution systems, all components are
installed in the following directory structure. Not all systems will have all components or
directories installed. The software is installed in the Programs folder on the local
system hard disk (BL12-TBD
).
Fig. 3-2: Directory structure of a Siemens Hotel Solution installation
Note
12/82
Siemens Hotel Solution - System software Service Pack 2 for Windows 7 020_A6V10444517_en--_a_--
Building Technologies General notes on installation 2014-07-07