User Manual

13
Card system
Magnetic cards Transponder cards Chip cards
Read 2 magnetic strips Proximity up to 5 cm Chip
Display
LED red: Door closed
LED green: Door opened
LED red: Door closed
LED green: Door opened
LED red: Door closed
LED green: Door opened
LED yellow: Please clean
room
LED red: Please clean room LED yellow: Please clean
room
LED yellow: Please do not
disturb
LED red: Please do not
disturb
LED yellow: Please do not
disturb
Operation
• Doorbell key • Doorbell key • Doorbell key
The guest card is inserted into the card holder. It releases lighting and switches the
air conditioning control from pre-Comfort to comfort mode.
The card holder has lighting for orientation when the guest card is not inserted. The
card holder also has an electronic doorbell or operating elements as an option.
Card system
Magnetic cards Transponder cards Chip cards
Read and hold 2 magnetic strips Proximity up to 5 cm Chip
Lighting 9 9
9
Operation
Room Service
8 8
9
Please do not disturb 8 8
9
Display
8 8 LED yellow: “Room service”
activated
8 8 LED yellow: “Please do not”
activated
Doorbell • Option • Speaker with three-
tone bell
• Speaker with three-tone bell
The card encoder encodes the access or guest card.
Card system
Magnetic cards Transponder cards Chip cards
Card type read and
encoding
Track 2 ISO 7810 Atmel/Temic T 5567 Siemens SLE5542, SLE4442
LCD display 9 9 9
Mechanical design Table top device Table top device Table top device
Interface RS232 RS232 RS232 / TCP/IP
The card reader and holder are suitable for wall mounting (flush mounted or in a
cavity wall box).
As is the case for the room units, the card reader and holder has various frame
series available, e.g. VIMAR idea, Siemens Delta, Bticino Living.
Additional frame series are available upon request for an additional fee.
Overview of functions
Card holder
Overview of functions
Card encoder
Overview of functions
Mounting
Note