User Manual

For internal use only 7 / 14
Siemens HMI CM2B6307en
Building Technologies Display and operating pages 12/15/2008
3.2 Diagnostics.
Diagnostics is used to troubleshoot the room controller.
Simulate Simulation = Simulation mode is enabled. The controller inputs and
outputs are separated from the application and the controller goes
into simulation mode. It is now possible to switch outputs in a
defined manner via additional parameters. This allows for trouble
shooting the room (e.g. for wiring mistakes). The active inputs can
be read in this mode.
Normal mode = The controller is in normal operation.
CAUTION:
Simulation mode remains active after a power outage (PowerFail).
The editable inputs and outputs remain in their old state after a
power outage.
Yes.
Parameters Description Can this
field be
edited?
Information Queries the info page. No.
Room Overview Queries room overview. No.
Dig. Inputs Act. Queries the Digital Inputs Active page. No.
Switch outputs Queries Switch Outputs page. No.
back Back to first page. No.