User Manual

For internal use only 5 / 14
Siemens HMI CM2B6307en
Building Technologies HMI for HRC3.1 and HRC3.2 12/15/2008
We assume that persons using our products and documents are authorized and
properly trained and have the requisite technical knowledge to use our products as
intended.
If lack of clarity or other problems associated with the use of the documents persist,
do not hesitate to contact the Product Manager at your nearest branch office, or the
support team.
Email: [e-mail]
Siemens assumes no liability to the extent allowed under the law for any losses
resulting from a failure to comply with the aforementioned points or for the improper
compliance of the same.
1.4 Target audience
The HMI user's guide is targeted at Siemens employees. A basic knowledge of the
Hotel Solution System is required to properly understand the user's guide. We
recommend that you attend training on the Hotel Solution system from Siemens.
2 HMI for HRC3.1 and HRC3.2
The HMI user's guide describes the displays and operating pages for the HMI
manual operator unit for use with the Hotel Solution room controllers HRC3.1 and
HRC3.2.
3 Display and operating pages
The sections below describe the display and operating pages of the HMI for the
HRC3.1 and HRC3.2 room controllers. The following display and operating pages
are available:
• First page.
• Diagnostics.
• Information.
• Room Overview.
• Digital inputs active?
• Switch outputs.
Manual operator unit
ACX84.910/AL