User Manual

1 / 3
Siemens Schweiz AG
Industry Sector – Building Technologies Division
Gubelstraße 22, CH-6300 Zug, Switzerland
Information number: IBT201103.009e
Public and Press Relations: Marc von Ah
Phone: [phone]
E-mail: [e-mail]
Press Presse Press Presse
Industry Sector
Building Technologies Division
Zug, March 4
th
, 2011
Hospital Build
Nuremberg, 4–6 April 2011
Siemens, Hall 4, Booth C6
Hospital Build 2011: Siemens Innovations for Efficient Hospitals
At Hospital Build 2011 in Nuremberg, Siemens will present its concepts and innovations for
safe, efficient, and environmentally friendly hospital operations under the motto “Increase
safety, maximize efficiency.” A major highlight at the Siemens booth C6 in Hall 4 is a fully
functional laboratory that shows Siemens technology in action. The Siemens booth also
features solutions aimed at increasing patient comfort, including the HiMed Multimedia
Entertainment terminal.
In modern laboratories, safety and energy efficiency are number one priorities. When handling
hazardous substances, it is not only necessary to avoid room air contamination or the formation of
explosive concentrations, but also to optimize energy consumption. The Siemens Building
Technologies Division meets these two requirements with its new laboratory solution which
combines the Desigo building automation system and other disciplines with innovative control
mechanisms for directed air flow and extraction in fume hoods.
This integrated approach results in a complete single-source solution that provides automation and
control of Heating, Ventilation and Air Conditioning systems, lighting, video surveillance and
access control, as well as fire safety and power distribution systems. The autonomous fume hood
controllers communicate via standardized LON interfaces with the room controllers, which
determine the required supply and exhaust air volumes in the room in quasi real time and rapidly
adjust them if needed.
The Siemens laboratory solution can be used for fume hoods of any type and from any
manufacturer and was successfully certified according to SN EN 14175, Part 6.