User Manual

12/14
Siemens FOS ⇔ HOTEL SOLUTION link (HotFOS) CM110604en
Building Technologies Configuration 09/30/2008
4.4 Configuring the HotFOS service
To change the configuration of the HotFOS service after it has been set up for the first
time, shut down the link software and click Configure Service. A dialog box will appear
in which you can modify the properties of the service.
To activate the changes, the service must be restarted.
4.5 Removing the HotFOS service
A previously installed service can be removed by clicking the Remove Service button.
4.6 Other functions
Other functions of the HOTEL SOLUTION Configuration Utility are described in the
relevant user manual.