User Manual

10/14
Siemens FOS ⇔ HOTEL SOLUTION link (HotFOS) CM110604en
Building Technologies Configuration 09/30/2008
4.2 Adding HotFOS
To add these services, select "FOS Link (Hogatex, Bosch...)" from the tree structure.
This activates the Add Service button.
Click Add Service. A dialog box for configuration of the HotFOS link software appears.
Two parameters can be set here:
• Datagram header
• Timeout for key creation
This depends on the front-office system in use. Refer to your FOS documentation to
check the coding used to transmit the length of a datagram.
This defines how long the link software will wait for a key to be created. When the
timeout time expires, an error message is transmitted to the front-office system.
Fig. 4-3: Setting up HotFOS
Datagram header
Timeout for key creation