Data Sheet for Product

2/6
Siemens HTH3.1/B – Transponder card holder CM2N6336en
Building Technologies 01.12.2008
Functions
The HTH3.1/B transponder card holder communicates with the HRC3.. room controller
via a serial port, and has the following functions:
• Indicates the location of the card holder with 4 built-in LED indicators, to assist those
entering the room
• Reads the access code on the transponder card, which is inserted in the card slot on
the front of the card holder
• After reading it, transfers the access code to HRC3.. room controller
• Enables the occupancy-dependent room functions based on the room occupancy
status (guest(s) in the room, hotel staff in the room, room empty)
• Three-tone chime through built-in speaker for doorbell feature
Types
HTH3.1/B Transponder card holder
Ordering
When ordering, please specify the quantity, product name and type code:
30 Transponder card holders HTH3.1/B
30 Base frame for installation system AZ26.x (where X = 1 …4)
The base frame must be ordered separately (as in the table below):
Base frame Cover frame
Bticino Living International
AZ26.1
Bticino Light
Vimar Idea
AZ26.2
Siemens Delta Futura
Ave Sistema 45
AZ26.3
Gewiss Playbus
AZ26.4 Legrand Ergo
Compatibility
See assortment overview, N6301.
Example
Base frame