User Manual

26/28
Siemens Reservation and energy management CM110602en
Building Technologies Background information 09/30/2008
5.4 Output interface
The hotel staff needs a list showing the most energy-efficient order for the allocation of
rooms. This list is provided by the output interface.
Indicates the room concerned.
Indicates the type of room. Valid options are shown in the Room_Types table.
Normally, these are: Single, Double, Suite etc.
Specifies the current state (operating mode) in the room. This value also represents the
temperature setpoint in the room.
The priority of the room in the Rooms table. This value should be tested via the link, to
obtain information about "offline" rooms. A value of 0 indicates a room which must not
be allocated to a guest. The relevant messages to the FOS should be generated.
Room number:
Room type:
Room state:
Room priority: