Data Sheet for Product

• SOS alarm or bathroom alarm Management
• "Do not disturb" and "Room service call" or "Make up room"
• "Guest present" indicator for hotel staff only
• Bell disabled in conjunction with "Do not disturb"
• Alarm message if door is opened in unoccupied room (door intrusion)
• Alarm message if window is opened in unoccupied room (window intrusion)
• Registration and transfer of messages and alarms to the database server
• Optionally, other functions can be programmed and linked to inputs and outputs
• Room controller parameter setting Building automation
and control
• Remote adjustment of room comfort setpoint
• Alarm monitoring and message display
• Room status monitoring
• Automatic registration of temperature data
• Trend graph for past three days
• Configurable outputs (guest-dependent or staff-dependent)
• Interface to front-office system (FOS) via the hotel room management station
HSW3.1
• Online communication over building bus Communication
• Konnex/EIB bus connection (in LTE mode)*
• RS485 room bus for communication with room operator units, card readers and card
holders
* Konnex communications take place in LTE mode. S-mode-communication is
available, but can be used only for customer-specific applications.
Note
Ordering
When ordering, please specify the quantity, product name and type code.
The HCS3.1 terminal kit can be ordered separately.
Example: 20 Room controllers HRC3.1
20 Terminal kit for HRC3.1 HCS3.1
Compatibility
Please refer to the product range overview, N6301.
3/12
Siemens HRC3.1 – Room controller CM2N6313en
Building Technologies 01.09.2008