Data Sheet for Product

Function
The HTC3.2 room operator unit communicates with the HRC3.1 or HRC3.2 room
controller via a serial port, performing the following functions:
• Displays the room temperature setpoint
• Transmits the manual room temperature setpoint adjustment
• Displays the manual room temperature setpoint adjustment
• Transmits the manually set fan speed
• Displays the manual or automatic fan speed
• Transmits the "Auto" operating mode signal for automatic selection of the fan speed
• Measures and transmits the room temperature detected via the built-in 10 kΩ NTC
room sensor or via an externally connected NTC 10 kΩ room sensor
Types
HTC3.2/BB Room operator unit for Bticino Living cover plate range
HTC3.2/BW Room operator unit for Bticino Light cover plate range
HTC3.2/VB Room operator unit for Vimar Idea cover plate range
HTC3.2/VW Room operator unit for Vimar Plana or Ikon cover plate range
Ordering
When ordering, please specify the quantity, product name and type code:
30 Ro om units HTC3.2/BB
Example
The following items depend on the desired overall program and installation type and
must be ordered separately from the corresponding frame supplier:
• Flush-mounted or cavity wall box for integration.
• Cover frame of the corresponding supplier with desired surface.
Compatibility
Name Type Data sheet
Room controller
HRC3.1
N6313
Room controller
HRC3.2
N6314
Room operator unit on same room bus
HTC3.2/..
N6320
Cable temperature sensor
HSE1.1
N6221
Room temperature sensor in VIMAR idea housing
HSE1.2
N6221
Magnetic card reader on same room bus
HMR3.1/A
N6334
Magnetic card holder on same room bus
HMH3.1/A
HML3.1/A
N6335
Transponder card reader on same room bus
HTR3.1/B
N6336
Transponder card holder on same room bus
HTH3.1/B
N6337
Chip card reader on same room bus
HCR3.2/..
N6332
Chip card holder on same room bus
HCH3.2/..
N6333
2/10
Building Technologies HTC3.2/.. - Room operator unit CM2N6320en
01.09.2008