Data Sheet for Product

Mechanical design
Construction
The chipcard reader consists of:
• Component assembly (carrier, printed circuit board, four LEDs, membrane switch,
chipcard reader-unit, terminal block and DIP switch)
• Base frame:
− Bticino Living/Type L4703 for HCR3.2/BB
− Bticino Light/Type N4703 for HCR3.2/BW
− Vimar Idea/Type 16713 for HCR3.2/VB
− Vimar Plana or Ikon/Type 20613 for HCR3.2/VW
The component assembly is permanently glued into the base frame and cannot,
therefore, be replaced.
Display Depending on the standard application configured in the HRC3.1/HRC3.2 room
controller, the following room states can be displayed:
• Do not disturb
• "Make up room" or "Room service" call
• SOS call for assistance
• "Guest present" indicator (for hotel staff only)
• Door open
• Door closed
• Access denied
Operator controls, connections and display elements
21
6332Z01de
V1 V2 V3 V4 T1
Front view
1
Base frame with fixing screws
• Bticino Living/Type L4703 for HCR3.2/BB
• Bticino Light/Type N4703 for HCR3.2/BW
• Vimar Idea/Type 16713 for HCR3.2/VB
• Vimar Plana or Ikon/Type 16713 for HCR3.2/VW
2
Card slot backlit with 3 green LEDs
V1 Red LED
Door closed
V2 Green LED Door open
V3
Yellow LED Room service call
V4 Yellow LED Do not disturb
T1
Membrane
switch
Doorbell function
Key
3/8
Building Technologies HCR3.2/.. - Chipcard reader CM2N6332en
01.09.2008