User Manual

2/14
Building Technologies RXC34.1/ALG – Controller with LonWorks® interface CM2N3848en_02
12.01.2007
Application
The controller application is determined by downloadable application software, also
referred to simply as the “application”. The application and its functions in relation to the
RXC34.1/ALG is described in the RXC applications library (CA1100300).
The RXT10 commissioning and service tool is used to download the application and to
commission the RXC34.1/ALG (see "Commissioning").
The controller is delivered with laboratory application LAB02, for use in a laboratory
environment.
Functions
The controller functions are determined by the selected application and its parameters.
For a detailed description of functions, refer to the DESIGO RXC Applications library,
document CA110300.
Types
RXC34.1/ALG Controller
Ordering
When ordering, please specify the quantity, product name and type code.
The controllers are delivered with laboratory application LAB02 for use in a laboratory
environment.
The controllers are delivered in packs of six, including connection terminals.
Example of an order for twelve (12) controllers
2 Packs RXC34.1/ALG
Design
The processor card is accommodated in a two-part sheet-metal housing. This housing
is designed for mounting on a standard DIN rail or a mounting plate. The housing has
apertures for four clips for secure wall mounting.
The supply voltage and process signals are connected via plug-in terminals.
To prevent accidental physical contact with relay connections carrying voltages in
excess of the SELV voltage range (U
eff
> 42), the device must be fitted in a housing
(preferably a control panel). This enclosure must be accessible only by use of a key or
tool.
Alternatively, a commercially available contact guard can be used.
Protection from physical
contact