Installation manual

spadC05.fm
A31003-X7140-A100-3-76A9, 02-2006
HiPath SimplyPhone for Outlook 4.0, Administrator Manual
5-13
Appendix
Syntax of the registry entries
5.3.2 Client component Locations.ini
5.4 Syntax of the registry entries
After installation, the values remain in the registry under one of the keys
HKEY_LOCAL_MACHINE\Software\Siemens\SimplyPhone
\Common\Settings
\Common\Settings\Telephony
\Entry\Settings
\Solutions\
\Solutions\CallData
\Solutions\CallerIdentification
\Solutions\CPhoneOutlook
\Solutions\HLMData
\Solutions\Teambar
\TripelM
When SimplyPhone for Outlook starts up the user-specific values are copied to the
HKEY_CURRENT_USER section of the registry if the ...\Common\Settings\_KeysCopied
value under HKEY_LOCAL_MACHINE is greater than the relevant value under
HKEY_CURRENT_USER.
If values that were changed under HKEY_LOCAL_MACHINE are to become effective for all us-
Entry Description
UserCountry Country code
UserArea Area code
UserNumber Main station number
UserExternal Access code for national calls
UserForeign Access code for international calls.
Caution: this setting had a different meaning prior to version 2.02.
In many cases, for example, 00 had to be entered here, but now
only 0 is required.
CRconfigFile Name of the configuration file of the data source
XPRCallerNo End digit for listening to the Xpressions450 voice mailbox (for ex-
ample, 1)
XPRAccessNo Access number for the Xpressions450 voice mailbox (for example,
6400)
ShortDial[n] Tie lines
ShortDialEx[n] Further information on fixed lines