Installation manual

spadC03.fm
A31003-X7140-A100-3-76A9, 02-2006
HiPath SimplyPhone for Outlook 4.0, Administrator Manual
3-9
Partner identification service
Installing on a server
1. Open the Default Security Settings object. Click the Programmatic Settings tab. Set the
following lines to Automatically Approve:
– When sending items via Outlook object model
– When accessing the address book via CDO
– When accessing address information via CDO
2. Close the form and confirm the memory prompt with Yes.
If not, proceed as follows:
1. Then open the file Default Security Settings.oft in the Security folder in Windows Explor-
er. You are then prompted to select an Outlook folder. Select the folder Outlook Security
Settings.
2. In the open form, select the entry Publish Form under Forms in the Tools menu. Set the
folder Outlook Security Settings in the drop-down list at the upper edge of the window.
Enter the following in the field Display Name: Outlook Security Form. Click Publish.
3. Close the form and acknowledge the memory prompt with Yes.
Checking
Check the following registry key on the client: HKEY_CURRENT_USER\Software\Poli-
cies\Microsoft\SecurityCheckAdminSettings. This key must be set to 1 so that the
default security settings work as described above.