Installation manual
Installing SimplyPhone for Outlook
A31003-X7140-A100-3-76A9, 02-2006
2-26 HiPath SimplyPhone for Outlook 4.0, Administrator Manual
spadC02.fm
Installing the driver and software in a third-party environment
2.4 Installing the driver and software in a third-party environment
This section describes the correct sequence for the individual installation steps in a third-party
environment.
2.4.1 Installing the CAP TAPI Service Provider driver
If you need detailed information, refer to the service manual for HiPath CAP V3.0 TAPI Service
Provider.
You can change the TAPI installation settings prior to installation by modifying the file set-
upTAPI.ini. This file can be found in the same folder as the file setupTAPI.exe on the in-
stallation CD.
Do not forget to delete the comment reference ";" at the start of each line that you want to au-
tomatically execute in every installation routine.
1. Call up the file setupTAPI.exe in the installation directory
...\CTI_CD_SimplyPhone_Produkte_Edition_yyyy_mm_dd\Software
2. Select the required setup language and click OK.
3. Follow the installation program instructions.
4. Enter the IP address of the CAP server (ask your administrator). The default port number
must not be changed.