Installation manual

Installing SimplyPhone for Outlook
A31003-X7140-A100-3-76A9, 02-2006
2-18 HiPath SimplyPhone for Outlook 4.0, Administrator Manual
spadC02.fm
Preparing for installation on a client PC
Random LDAP data sources can also be configured.
To d o th is
– you must make an appropriate entry in the main configuration file (default:
SPCr_svc.cfg),
– you must create a CFG file in the folder \SPCr\dbserver; this file should contain suitable
attribute mapping for the relevant LDAP server.
More information on the syntax of the configuration files and attribute mapping can be found
in the Appendix.
7
Do not make any changes to the mapping list (entries, such as, AttrMap.dn = dn,
etc.) for the existing data source configuration files because these entries govern
correct communication between SimplyPhone for Outlook and the server.
>
The server MUST be correctly entered under DBEnv.ServerAddress in the data
source configuration file used, as described in the sections "Entering a server for
paging" and "Entering a server for partner identification".
...
CRConfigFile=SPCr_svc.cfg
...
Locations.ini
[LDAP config.
and mapping]
CRI.cfg
[LDAP config.
and mapping]
Outlook.cfg
[LDAP config.
and mapping]
SCD.cfg
LDAP config.
and mapping
CRIREMOTE.cfg
...
CallerIdentServerList=
CRI,CRIREMOTE,...
QueryServerList=
Outlook,SCD,...
...
SpCr_svc.cfg
Folder: \SPCr
Folder: \SPCr\dbserver