Installation manual

spadC02.fm
A31003-X7140-A100-3-76A9, 02-2006
HiPath SimplyPhone for Outlook 4.0, Administrator Manual
2-15
Installing SimplyPhone for Outlook
Preparing for installation on a client PC
The CLA is automatically installed during first-party installation. The CLA is not installed during
third-party installation and must, therefore, be provided on a server in the customer network.
Initial startup of SimplyPhone is not possible without CLA.
The IP address of this server and the port number of the CLA (this must be set during CLA in-
stallation) must be made known to the SimplyPhone. These parameters can be set during in-
stallation with the file SP_Inst.ini. CLA can also be used to set the number of connection
retries and the timeout for connection retries.
These settings can be found in the section [HLM].
The values set are copied to the registry under
HKEY_LOCAL_MACHINE\SOFTWARE\Siemens\SimplyPhone\Solutions\HLMData
These values are copied to the user area the first time SimplyPhone is started up and can be
modified there for each user:
HKEY_CURRENT_USER\Software\Siemens\SimplyPhone\Solutions\HLMData
The above-mentioned values can be modified during live operation in the Settings dialog on
the Licensing tab (accessed via the SimplyPhone context menu).
Another setting in the installation file SP_Inst.ini controls the mode used and the CLA li-
censing files:
UsedTAPIServiceProvider=FirstPartyTAPI/ThirdPartyTAPI
The FirstPartyTAPI setting is intended for use with CallBridge Collection, CallBridge for
Desktop, and optiClient. In this case, the HLM mode is "Remote". ThirdPartyTAPI is for
TAPI120, TAPI 170, and CAP. In this case, the HLM mode is "Floating Standard". This setting
should not be modified as it is used for license generation.
The SimplyPhone installation directory contains grace period configuration files. These let the
user operate the system for a trial period of 30 days and must not be modified.
CLAIpAddress IP address of the CLA Default: 127.0.0.1
CLAIpPort Port number of the CLA Default: 61740
CLAConnectionRetries Connection retries with the CLA Default: 3
CLAConnectionTimeout Timeout for CLA connection retry in ms Default: 5000 (5s)
Product Grace Period configuration file
First Party TAPI SPON1PTY_V4.0.gpcf
Third Party TAPI SPON3PTY_V4.0.gpcf