Installation manual

spadC02.fm
A31003-X7140-A100-3-76A9, 02-2006
HiPath SimplyPhone for Outlook 4.0, Administrator Manual
2-13
Installing SimplyPhone for Outlook
Preparing for installation on a client PC
2.2.5.2 Assigning lines for the teambar
To prevent users from selecting lines that are not assigned to their team, the terminal server
administrator can assign team lines to users.
HKEY_Current_User\Software\Siemens\SimplyPhone\Solutions\Team-
bar\Member0
AssignedLine* REG_SZ <Leitung>
AssignedLine*: * = 0 - Number of assigned lines.
<Line>: Name of the line (as specified in the corresponding TSP configuration dialog).
Lines are assigned as described in the previous section.
2.2.6 Preparations for licensing
In SimplyPhone for Outlook V4.0, licensing is performed with HiPath License Management. A
distinction is made during installation as to whether First Party TAPI or Third Party TAPI is in-
volved. The setups are different for these two variants.
When using SimplyPhone at a First Party TAPI (for example, CallBridge Collection V2.0), Hi-
Path License Management is operated in "Remote" mode. When using SimplyPhone at a Third
Party TAPI (for example, CAP V3.0), HiPath License Management is operated in "Floating
Standard" mode. The "Floating Restricted" or "Floating Reserved" modes are not supported.
The following diagram illustrates SimplyPhone licensing in the HLM environment.