Installation manual

spadC02.fm
A31003-X7140-A100-3-76A9, 02-2006
HiPath SimplyPhone for Outlook 4.0, Administrator Manual
2-11
Installing SimplyPhone for Outlook
Preparing for installation on a client PC
The tie line number is entered in canonical format in front of the phone number and separated
from it by a semicolon, for example, ShortDial1=96;+49 89 636. The name of the tie line
is then added followed by the country code,
for example, ShortDialEx1=Neuperlach;49.
If there are multiple tie lines for a single location, the inputs are numbered consecutively on en-
try (ShortDial2= ... etc.).
2.2.4 Preparations for the terminal server
The trace file name must be specified in the registry if the trace is active.
The default trace is output to the installation directory with the default name. Multiple versions
of the same output are not permitted as they would cause mutual blocking here. Therefore, we
recommend creating the trace files on a share that is then unique for each user.
The trace files that must be output under
HKEY_Current_User\SOFTWARE\Siemens\SimplyPhone\Common\Settings
are as follows:
– TraceFilename
2.2.5 Assigning lines on the terminal server
CAP TSP lines (with or without fixed authentication) must be configured if Microsoft TAPI is im-
plemented. All necessary lines are configured on the terminal server. However, the operating
system does not allow you to assign specific lines to a particular user.
All of the following settings must be manually entered in the registry by the terminal server ad-
ministrator (or via scripts). These settings have not yet been automated.
2.2.5.1 Assigning lines for the dialer
To prevent users from selecting unauthorized lines, the terminal server administrator can as-
sign lines to users.
HKEY_Current_User\Software\Siemens\SimplyPhone\Entry\Settings
AssignedLine* REG_SZ <Line>
AssignedLine*: * = 0 - Number of assigned lines.
<Line>: Name of the line (as specified in the corresponding TSP configuration dialog).