Installation manual

Installing SimplyPhone for Outlook
A31003-X7140-A100-3-76A9, 02-2006
2-8 HiPath SimplyPhone for Outlook 4.0, Administrator Manual
spadC02.fm
Preparing for installation on a client PC
2.2.1.2 Entering a server for partner identification
The file CRIRemote.cfg is used to access data associated with a partner identification ser-
vice.
Use a text editor to open the file CRIRemote.cfg in the folder \SPCr\dbserver to set the
server for partner identification.
CRIRemote.cfg - DBEnv.ServerAddress=$SP_SERVER$:4999
Enter the name or the IP address of the CRI server for $SP_SERVER$. Do not change the port
number (:4999).
Multiple SimplyPhone for Outlook partner identification services
If you want to use more than one partner identification service, the file names of the configura-
tion files must start with CRIRemote.
Example:
CRIRemote_Service1.cfg and CRIRemote_Service2.cfg.
Contents of SPCr_svc.cfg:
CallerIdentServerList=
CRI,CRIRemote_Service1,CRIRemote_Service2
2.2.1.3 Entering a server for paging
In the folder \SPCr\dbserver, open the file
● Ex55.cfg for operation with Exchange 5.5 Server
● Ex2K.cfg for operation with Exchange 2000 Server
● Ex2003.cfg for operation with Exchange 2003 Server
use a text editor to define the server for paging:
[Ex55|Ex2K|Ex2003].cfg - DBEnv.ServerAddress=$SP_SERVER$:[389|3268]
Enter the name or the IP address of the ActiveDirectory server for $SP_SERVER$. Do not
change the port number.
The Exchange Server name from the current profile is used in Outlook 2000, Outlook XP, and
Outlook 2003 which means that no manual change is necessary here.
>
For more information on partner identification, see Chapter 3, "Partner identification
service" and Section 5.6.3, "Switch for partner identification".