Operation Manual

Testing a CP

A31003-S2330-B692-3-7619, August 2003

HiPath Xpressions V3.0 Automated Attendant, User Guide

Introduction

● Setting the number range for the Telematik protocol created

– The number range must contain the dial-in number(s) configured in the CPAA for the

call processing application.

4.6 Testing a CPA

● Select the CPA dial-in number.

● The system announcement welcome (= system greeting) is played three times.

● The system announcement goodbye (= exiting the system) is played three times.

● The connection is then cleared down.

Note that the exact structure of the dial-in number may differ slightly depending on the tele-

phone systems in use and the connection variants. In any case, the dial-in number given must

correspond exactly to the number which is transferred by the call processing function during a

call. For example, the number transferred always contains the dialed suffix digits; the

Xpressions450 server CO access or number, however, is not contained in many constellations.