Operation Manual

Call Processing Application Assistant – Applicatio
n
A31003-S2330-B692-3-7619, August 2003
HiPath Xpressions V3.0 Automated Attendant, User Guide
35
Introduction
Parameters buttons:
If the appropriate Timeout Call Transfer Type is selected, clicking the Parameters button
opens an additional window in which supplementary parameters are set.
Depending on the type, the following parameters may be visible:
– Output connection failure without details?:
Fault report without details in the event of connection failure.
– Suppress default announcement if call number is entered?:
The call number entry prompt is not played back.
– Alternative type 1 and alternative destination 1:
Defines the first alternative type and the first alternative destination.
– Threshold for destination 2:
Defines when the second alternative destination becomes active.
– Alternative type 2 and alternative destination 2:
Defines the second alternative type and the second alternative destination.
– Do not route via PBX?:
Calls are not routed via the telecommunication system.
– Ignore preset call forwarding destination?:
Preset call forwarding destination is ignored.