Specifications

other_user_features.fm
A31003-H8022-F100-2-7618, October 2006
HiPath 8000 V2.2, Feature Description Guide
5-17
Other User Features
Screen List Editing
5.17.2 Functional Operation
The system administrator can allow the subscriber to recall callers who have their calling
identity suppressed. The administrator can also limit recalls to intraswitch calls (calls between
business group members) only.
To activate the return call feature, the subscriber goes off-hook, receives a dial tone, and enters
*69.
If the call setup is attempted and the user is busy, the HiPath 8000 monitors the busy/idle status
of both lines and initiates a callback when the users are found idle.
A return call request is denied if the called line has station call forwarding—all calls active.
Application of special ringing to the subscriber’s line is directed to the activating station only,
regardless of whether station call forwarding—all calls has been activated for the calling party.
5.18 Screen List Editing
The screen list editing feature provides the capability to use the telephone user interface to
create and modify lists associated with the features described in the following sections:
● Section 5.19, “Selective Call Acceptance”, on page 5-17
● Section 5.20, “Selective Call Forwarding”, on page 5-19
● Section 5.21, “Selective Call Rejection”, on page 5-21
● Section 5.22, “Serial Ringing”, on page 5-22
● Section 5.23, “Simultaneous Ringing”, on page 5-25
5.19 Selective Call Acceptance
5.19.1 Definition
The selective call acceptance feature, sometimes known as selective caller accept , provides
the capability to build a list of numbers (known as a
screen list ) from which the subscriber wants
to accept incoming calls.
This feature can be provisioned at the business group level with a denied option at the
subscriber level.
>
Siemens SIP endpoints also have local features that simplify returning of calls. Refer
to the applicable user manual for information about those features.