Technical data

Copyright © Siemens Enterprise
Communications GmbH & Co. KG 11/2007
Hofmannstr. 51, D-81359 Munich, Germany
Reference No.: A31002-H1570-D100-1-7629
The information provided in this brochure contains
merely general descriptions or characteristics of per-
formance which in case of actual use do not always
apply as described or which may change as a result
of further development of the products. An obliga-
tion to provide the respective characteristics shall
only exist if expressly agreed in the terms of con-
tract. Availability and technical specifications are
subject to change without notice. The trademarks
used are owned by
Siemens Enterprise Communications GmbH &
Co. KG or their respective owners.
Siemens Enterprise Communications
www.siemens.com/open
Communication for the open minded
Technical data (HiPath 500 V7)
Network interfaces
ISDN
● S
0
basic rate access with DSS1 protocol
– Point-to-multipoint connection
–System connection
User interfaces
Digital
● U
P0/E
for connecting digital OpenStage,
optiPoint 500 phones and DECT base
stations
Analog
● a/b for connecting analog
equipment, group 3 fax or modem
S
0
bus
● S
0
user bus for up to eight independent-
ly powered terminal devices (fax, ISDN
PC card)
Other interfaces
V.24
● For connecting a call charge printer
LAN interface
● 10 MBit Ethernet connection for admin-
istration purposes and software
solutions
Power supply
The systems are configured as standard for
operation within a network. Power failures
may be bridged by an uninterruptible pow-
er supply (UPS) (optional).
Nominal input voltage (AC): 88 – 264 V
Rated frequency: 50/60 Hz
Environment/operating conditions:
Temperature: +5 °C to +40 °C
Relative humidity: 5 – 85 %
Color: Arctic white
Dimensions (HxWxD in mm): 470 x 370 x
80
Weight: Approx. 2 kg