Operation Manual

Service Guideline HiPath Workpoint Clients
HiPath Xpressions Compact V1.0
Issue 1.0 from 02/02 Page 7 of 24
2.2 Limitations/dependencies
The possible number of mailboxes is not limited by the license key but is tied to the type of
system:
HiPath 3300/3350: 500 mailboxes
HiPath 3500/3550: 500 mailboxes
HiPath 3700/3750: 500 mailboxes
Furthermore, there are limitations for the following types of mailboxes:
AutoAttendant mailboxes: 100 (50 for HiPath 3300/3350) from the 500 mailboxes
Information mailboxes: 100 (50 for HiPath 3300/3350) from the 500 mailboxes
Affects all HiPath Xpressions Compact boards:
The HiPath Xpressions Compact data is not in the KDS backup.
Configuration information
• in the max. 1 Xpressions Compact board per system
• allowed slots for Xpressions Compact
- in the HiPath 3300: slot 4 or 5
- in the HiPath 3350: slot 5
- in the HiPath 3500: slot 4, 5, 6, 7, 8 or 9
- in the HiPath 3550: slot 5, 7 and 9
- in the HiPath 3700/3750 basic box: only slot 7; E
xtended Line Size (ELS)-box: only slot 8
In addition
– as far as the HiPath 3700/3750 is concerned – a ferrit (order-no. C39022-Z7000-C7)
has to be applied in the basic box to the lead off cable of the board in slot 6 resp. in the ELS-box
to the lead off cable of the board in slot 7. In the case, slot 6 resp. slot 7 is not occupied by a
board, then the ferrit has to be allocated to the lead off cable of the next board that is plugged in -
left to the Xpressions Compact board (At the current status of the project, the information to the
last bullet are to be seen as provisional.)
• The Xpressions Compact-board of the type L24 and a SLMO24 should not be joint owners of the
same PCM-bus. In the master/slave mode of the SLMO24, the complete accessibility is not guaran-
teed.
• The Xpressions Compact-board of the type L8 and L24 are allowed to be applied and to be with-
drawn from a “running” HiPath-system. (hot-plugable)
2.3 Product introduction
2.3.1 Client Information, Product introduction
As a client of Siemens AG, you can obtain further information about this from your country-specific
Siemens organisation.
2.3.2 Siemens Information, Product introduction
The market launch dates can be found in the Sales Information.