Operation Manual

Service Guideline HiPath Workpoint Clients
HiPath Xpressions Compact V1.0
Issue 1.0 from 02/02 Page 15 of 24
3.4 On-site system access
• Via V.24 system interface using the HiPath 3000 Manager E/C service tool
- Access only possible with user identification and password
• Via integrated digital modem (ISDN B channel access) using
HiPath 3000 Manager E/C service tool
- Access only possible with user identification and password
• Via integrated analog modem (IMOD, max. transfer rate 9600 baud) using HiPath 3000
Manager E/C service tool
- Access only possible with user identification and password
• Via IP protocol
- Access only possible with user identification and password
Affects all HiPath Xpressions Compact boards:
A direct connection between the TCP/IP stack and a local service PC over a cross-link cable or
between the TCP/IP stack and the customer LAN is only allowed for service purposes in the
framework of a short-term connection.
The connection must be removed after the completion of the service routine.
Note:
The customer can also make customised changes himself/herself using a PC and the HiPath 3000
Manager C service tool.
3.5 Remote system access
• Via integrated digital modem (ISDN B channel access) using
HiPath 3000 Manager E service tool
- Access only possible with user identification and password
• Via integrated analog modem (IMOD, max. transfer rate 9600 baud) using HiPath 3000
Manager E service tool
- Access only possible with user identification and password
• Via IP protocol
- Access only possible with user identification and password
Note:
The Assistant E must work together with the certified Hicom Teleservice tool (HTS tool) program.