Operation Manual

IVMC05_ENG.fm
User Manual 5-1
For internal use only Recording
5 Recording
During a telephone call the record function can be activated by pressing the programmed
record key or with a key sequence. Deactivation results either when the programmed record
key is pressed again or when the conversation is ended. The current status is displayed in the
system telephone display. The recording is delivered as a normal message and is stored in the
input area. It is not specifically identified as a recording.
This feature is only configurable with the HiPath 3000 Manager. According to the configuration
(and independent of legal requirements), one of the following audio information messages is
played back:
● Notification that the conversation is being recorded.
● A short notification tone.
● No acoustic notification.
Recording may be automatically stopped or not started in the following situations:
● the maximum storage capacity has been reached
● message recording is deactivated
>
The end of recording is not signaled acoustically.