Operation Manual

XPR100us04.fm

User Manual 4-5

For internal use only

Administering Mailboxes with the Super-User Function

Accessing the Super-User Function

4.2.2 Changing the Code Number for the Super-User Function

The super-user function is protected against unauthorized access by a code number.

After the system administrator has accessed the super-user function and entered the valid

code number, the code number can be changed if necessary. On accessing this function (see

Figure 4-1), the system administrator is guided through the corresponding procedure via ap-

propriate system announcements.

4.2.3 Changing the Language for System Announcements

After the system administrator has accessed the super-user function and entered the valid

code number, the language for super-user system announcements can be changed if required.

On accessing this function (see Figure 4-1), the super-user is guided through the correspon-

ding procedure via appropriate system announcements.

Note:

The * and # characters are not part of the code number, but a control prefix

required by the system.

Function Key

Announce current code number 2

Change the code number. New code numbers must be entered twice for secu-

rity reasons.

Table 4-3 Changing the Code Number

Function Key

Announce current language 2

Scroll through available languages and select one 8

Table 4-4 Changing the Language for System Announcements