User Manual

Technical data
HCW3.2
Supply Voltage SELV DC 12 V + /– 15%
Current consumption 0.2 A
Supply interface
Socket on rear of unit External diameter 5.5 mm,
pin diameter 2 mm
Bus interface
Sockets on rear of unit
RS232, D-Sub 9
TCP/IP, RJ45, 8 pin
Display
LCD 2 lines of 16 characters each
Chipcards Type Siemens SLE5542, SLE4442
Ambient conditions
Normal operation To IEC 721-3-3: Class 3K5
Temperature 0...+50 °C
Humidity < 85%rH
Air pressure Min. 700 hPa, equivalent to
max. 3000 m above sea level
Transport To IEC 721-3-2: Class 2K3
Temperature -25...+65 °C
Humidity < 95%rH
Air pressure Min. 260 hPa, equivalent
to max. 10000 m above sea level
Industry standards
Product safety Automatic electrical controls for household
and similar use
EN 60 730
Electromagnetic com-
patibility
Emitted interference in residential areas EN 61 000-6-3
Interference immunity in residential areas EN 61 000-6-1
Housing
protection standard
To EN 60 529 IP 20
Protection class To EN 60 730 III (without power supply unit)
conformity Meets the requirements of:
EMC Directive 89/336/EEC
Low voltage directive 73/23/EEC
Environmental compati-
bility
Environmental product declaration
CM2E6340en provides data on environ-
mentally compatible product design and
assessment (material composition, packag-
ing, disposal)
ISO 14001 (environment)
ISO 9001 (quality)
UL/CUL approval UL/CUL 916
Dimensions
Orientation during operation
Horizontal only
See also dimension diagrams 57.5 x 105 x 175 mm (H x W x D)
Color Plastic components Gray
Weight excluding packaging
Chipcard encoder
Power supply unit
Serial interface cable
330 g
120 g
140 g
Weight including packaging
700 g
Power supply unit
Input Supply voltage AC 100 ... 230 V
Frequency 50/60 Hz
Current consumption 150 mA
Output Safety-low voltage SELV DC 12 V
Output current 450 mA
Cable length 1.75 m
4/6
Building Technologies Chipcard encoder CM2N6340en
01.09.2008